12-cassette LANGSTROTH honey extractor, Ø1000mm, electric drive, semi-automatic, CLASSIC

Cassette honey extractor, Ø1000mm, 12 x Langstroth, electric drive, CLASSIC LINE. Semi-automatic controller. Stainless steel partition plates.

Reference: W205301B

Want to buy this product?
Please contact the distributor in your country

See the list of distributors

12-cassette LANGSTROTH honey extractor, Ø1000mm, electric drive, semi-automatic, CLASSIC

Cassette honey extractors are designed for larger apiaries. They are characterized by a small number of cassettes in the basket of honey extractors, but for this they are very efficient during centrifugation. The spinning cycle takes place in two directions, and thanks to the guides used, there is no need to manually move the cassettes and the possibility of blocking them.

Construction

The drum is made of acid-proof stainless steel, properly reinforced and stiffened, equipped with a trigger.

The stand is made of black steel covered with a layer of paint applied by electrostatic method. Stable and easy to dismantle.

Cassette basket made of stainless steel rods, equipped with cassettes, the construction of which allows the frames to be protected against the breaking of the slices (mesh size: 20x40 mm). The cassettes are connected with each other by means of springs that allow them to return to the starting position. The basket is additionally mounted in two mounts: top and bottom.

Partitions, by introducing partitions made of stainless sheet metal, we get the opportunity to increase the number of cassettes in the honey extractor. The cassettes overlap in this case on one another, but thanks to the sheet baffles, the honey falling out of the slices during centrifugation does not run into the adjacent patch but runs down the baffles.

Transparent covers made of metaplex, giving the opportunity to observe the spin process without having to open them and expose them to the danger of contact with the rotating basket.

0.75kW engine. Honey extractor is supplied with 230V AC.

As standard, we add special pads to the honey extractors to increase the comfort and safety of bee-keeping. Thanks to them, the vibrations of the honey extractors during honey spin are minimized.

The pads are made of PVC (SOFT) material. Very often spinning frames of different weights due to the different amounts of honey they contain. By using LYSON pads you ensure the highest quality of device optimization.

Semi-automatic control, honey extractor with this controller has the ability to work in manual mode (2 programs) and automatic (one program). In manual mode, you can set the direction and speed (using the knob). The automatic program is set at the factory. The automatic mode is activated by simultaneously pressing two side directional buttons.

W205301B

Data sheet

Line
CLASSIC
Drum diameter
Ø1000 mm
Drive system
Electric bottom
Power supply
230V
Controller
HES-02
Motor
Motoreducer 0,75kW
Drum thickness
0,8 mm
Honey gate
2x stainless 2”
Top bar
Flat bar 60x10 mm powder coated
Cover
4 mm acrylic glass
Legs
Hinges
Plastic 8 pcs.
Drum rim
Powder coated
Drum height
780 mm
Reinforcing frame
Powder coated
Type of frame
12x Langstroth
Cassette material
Stainless rod Ø3 and Ø6 mm
Other
Basket with partitions, shipped on pallet
Loading...