W200800
New product
Radial honey extractor, Ø1200mm, electric drive, CLASSIC Line. Semi-automatic controller.
Warning: Last items in stock!
Availability date: 02/22/2013
If you are interested in this product - call us +48 33 870-47-68 or enter and send us your phone number, e-mail address. We will call you back or write an email to you.
product line | CLASSIC |
Type of extractor | radial |
Drum diameter[mm] | Ø1200 |
Drive system | Electric bottom |
Power supply | 230V |
Controller | HES-02 |
Motor | Gearmotor 0.75kW |
Sheet thickness | 0,6 mm |
Cover | 5 mm |
Honey gate | Stainless 2x 2" |
Top bar | Flat bar 60×10 mm, powder coated |
Legs | Powder coated 60x40 mm |
Hinges | Plastic 8 szt. |
Drum height | 680 mm |
Drum rim | Powder coated |
Reinforcing frame | Powder coated |
Basket | Stainless rod Ø8 and Ø6 mm |
Other | Shipped on pallet |
Warranty | 5 years* |
* Warranty | for electrical components, controller, motor and drive elements - 2 years |
Radial honey extractors are characterized by the possibility of placing a large number of frames in the basket of honey extractor. The way the frames are arranged in a radial system causes that the centrifugation can take place in one direction. Radial honey extractors are recommended for large apiaries that have 1 or 2 frame types.
The drum is made of acid-proof stainless steel, properly reinforced and stiffened, equipped with a trigger.
Basket entirely made of stainless steel rods. Basket rims are equipped with appropriately profiled fastenings preventing the frames from falling out during the spin. The basket is additionally mounted in two mounts: top and bottom.
Transparent covers made of metaplex, giving the opportunity to observe the process of spinning without the need to open them and expose yourself to the danger of contact with the rotating basket.
Semi-automatic control, honey extractor with this controller has the ability to work in manual mode (2 programs) and automatic (one program). In manual mode, you can set the direction and speed (using the knob). The automatic program is set at the factory. The automatic mode is activated by simultaneously pressing two side directional buttons.